Lubricators

Dimensions

Approximate length is 38 inches (97cm.) OAL. Length of Cross is 22 to 27 inches (depends on design.) (56 cm. to 68 cm.)

Weight

36 to 71 Lbs. (16 to 33 Kg) Note: (Variations in weight occur with options used.)

Materials

Lubricator cross, top and cap are 4130 & 4140 steel meeting design specifications.

Threads

Cross Pins are 8 rd EUE. Top Cap is Acme #6 Thread. Flow outlets are 11-1/2V NPT and the Needle valve is 1/2" NPT.

Hardness

RC 20 to RC 27. Variation is due to window in specifications. Equipment can be manufactured to exact Brinnel or Rockwell hardness to comply with customer specifications.

Flow Outlets

Forged Steel weld type flow outlets with 3000 PSI WP. These are tested to 5000 PSI when they have been welded to cross yielding a lubricator working pressure of 3000 PSI per ASTM testing standards.

Pressures

Completed Lubricators are individually hydrostatically tested to 5000 PSI yielding a working pressure of 3000 PSI per ASTM testing standards.

Surface

Surfaces exposed to the elements and UV exposure are both primed and painted to protect from the elements. Optional coatings are available and quoted per your requirements.

Sealing Elements

The top and cross are further sealed by O-rings as is the catch assembly. 70 and 90 durometer Viton seals are both available to meet customer specifications.

Warranty

ILS warrants the lubricator to be free from defects in material and workmanship for a period of one (1) year from date of purchase, when used in compliance with accepted standards and practices of Plunger Lift operations.