Completion Products

Bit Release - The ILS Bit Release is used in operations for drilling out cement, cast iron bridge plugs and other drillable tools and thereby leaving the drill string intact as the production string.
K Expansion Joint - The ILS K Expansion Joint is used to allow expansion and contraction during injection or production operations.
Pump-out Cementing Sleeve - The ILS Pump-Out Cementing Sleeve is used for cementing tubing strings in both cased and open holes.
AS Retrievable Bridge Plug - The ILS AS Retrievable Bridge Plug is a high pressure plug for multiple zone and selective single zone operations such as acidizing, fracturing, cementing and testing.
Type C Perforation Wash Tool - The ILS Type C Perforation Wash Tool is for washing or acidizing perforations in casing and sand screens.
Downhole Tubing/Casing Swivel - The ILS Tubing and Casing Swivels isolate tools, casing, or tubing from rotation above.
Safety Joints - The ILS Safety Joints allow positive release of the tubing string in completions where retrieval problems are anticipated.
Cement Port Collar - The ILS Cement Port Collar provides a full opening stage cementer that needs no plugs or balls to operate.
Pump-Out Plug - Pump-Out Plugs are available with a choice of threads allowing installation to the bottom of the tubing string to isolate the tubing from the annulus.
DT-2 On-Off Tool - The Type DT-2 On-Off Tool is a tubing seal receptacle allowing isolation of a lower zone using a wireline blanking plug.
Type E Valve - The ILS Type E Valve converts double grip mechanical packers like the ASI-X and ASI-XS into retrievable bridge plugs.
Hydroset II - The Hydroset II is a hydraulic set, mechanically held dual string production packer run above a single string hydraulic set or wireline set seal bore packer.
DL TM Anchor - The ILS Type DL TM Mechanical Tubing Anchor Catcher is a retrievable positive action anchor tool to hold tubing strings in tension or compression during pump strokes to prevent tubing buckling.

Navigation